This ARINC 429 to 0-10Vdc Output converter is also in use by many companies who have a requirement to extract a specific ARINC 429 parameter from a user selectable Label and translate it into a 0-10VDC output. The labels to be converted should be specified by you when requesting a quote.

The Octal Label, the SDI, SSM and state of the parity (ODD/EVEN/NONE) are all selected via setting DIP switches on the PCB. The ARINC 429 to 0-10Vdc Output converter adapts automatically to high or low speed (12.5/100kHz) ARINC 429 data and the inputs are opto-coupled for electrical isolation purposes. The ARINC 429 to 0-10Vdc Output converter is powered from an external 28 VDC (18-36V) nominal supply with an internal current and thermal (102 ºC) fuse. The power inputs are reverse polarity protected.

Three LED indicators are provided and these indicate the following status:

• LED indicating no received data
• LED indicating Low Speed data
• LED indicating High Speed data

The ARINC 429 to 0-10Vdc Output converter uses a 12-Bit D/A resolution that takes its input from an ARINC 429 word - bits 29..18. Different output voltage options and resolutions are available upon request. There is also a DIP switch option on the board which can be configured to allow data to be extracted from bits 26..15 of the ARINC 429 word.
 

Click here to download the User Manual in Word format (Zipped 371kB)
[PASSWORD PROTECTED - To request password click here.]
 

Click here to download the Brochure in Acrobat PDF format (93kB)