This ARINC 429 to three 0-10Vdc Outputs converter is employed where there is a requirement to extract data from up to three separate user specified ARINC 429 Labels on the same databus and translate it into three separate 0-10VDC outputs. The labels to be converted should be specified by you when requesting a quote.

The SDI, SSM and state of the parity (ODD/EVEN/NONE) are programmed in the firmware. The ARINC 429 to three 0-10Vdc Outputs converter adapts automatically to high or low speed (12.5/100kHz) ARINC 429 data and the inputs are opto-coupled for electrical isolation purposes. The ARINC 429 to three 0-10Vdc Outputs converter is powered from an external 28 VDC (10-30VDC) nominal supply (15-72VDC available on request) with an internal current and thermal (102 ºC) fuse. The power inputs are reverse polarity protected.

Three LED indicators are provided and these indicate the following status:

• LED indicating no received data
• LED indicating Low Speed data
• LED indicating High Speed data

The converter uses a 12-Bit D/A resolution converter that takes its input from an ARINC 429 word - bits 28..17. Different output voltage options (5VDC or 15VDC) and resolutions are available upon request.

The connections for the YED/429/R1/DAT3 Adapter are via two D9 D-type connectors:

D9 Plug:
 

D9 Socket:

Output has a 100nF capacitor across the Analog output.

Click here to download the User Manual in Word format (Zipped 269kB)
[PASSWORD PROTECTED - To request password click here.]