|
PC/104 ARINC 429 CARD
Part Number: YED/PC/104/T2/R2
Transmit Operation
In Simulation
mode, the PC104/T2/R2 executes autonomously instructions held in the interface
memory and will perform cyclic and one shot modes of operation. Label
repetition rate and minor and major frame rates are completely controlled at
the board level, which significantly reduces the host PC overhead. The output
rise and fall time of the output signals are switchable to adapt to the
selected transmit frequency. For each simulated ARINC-429 Transmitter all
Labels can be generated and the label data and descriptors can be updated
during simulation at any time without corrupting the transmission. Multi-SDI
transmissions of the same label are possible and variation of individual
Label/SDI descriptors in real time are also permitted.
Receive
Operation
The opto-coupled receivers provide for comprehensive Bus
Monitoring and Data Acquisition. All received data is time tagged to 1mS
resolution. All Label/SDI filtering is performed on the card and data captured
from the bus is stored in 8k of FIFO memory. The card can be programmed to
generate interrupts when the FIFO reaches the half-full point or the status of
the FIFO's can be polled.
'C' Source Library
A ‘C’ Source code driver library accompanies
this product.
 Click
here to download PC/104/T2/R2 'C' Driver Library and user manual (Version 1.0 / 25 April 2002)
for Windows 95 / 98 / NT4 / W2K
(later operating systems, including XP, will also be supported – check with YED
for further information)
and the User Manual. (File size: 1,731kB)
[PASSWORD PROTECTED - To request password click here.]
Windows
Real Time Simulation and Data Bus Analyzer software
The card is supplied with a full function Windows
95/98/NT4/2000 (later operating systems, including XP, will also be supported – check with YED
for further information) Real Time Simulation / Data Bus Analyser package providing a
complete turnkey solution.
All data is displayable in engineering units (standard or
custom) with labels shown in octal. All data fields are user definable.
Multiple fields within a data word are possible, i.e. Discrete/Flags mixed with
a Binary field within a single word. Currently, engineering formats are
available for Signed binary, Unsigned binary, 2's compliment, BCD and Discrete
data.
 Click
here to download the User Manual
for ARINC 429 software in Acrobat (PDF) Format [Size: 505kB]
[PASSWORD PROTECTED - To request password click here.]
Click
here to Download Demo ARINC 429 Software
and User Manual in Word Format [Size: 3,929kB]
[PASSWORD PROTECTED - To request password click here.]
Click here
to Download the PC/104-T2/R2 brochure in Acrobat PDF format (87kB).
All units are designed to meet the European and
US EMC regulations.
|
|
Two independent transmit and two independent