Avionics Databus Specialist YED - an Avionics Databus Specialist Company

Handheld ARINC429 Rx

Part Numbers: YED/DATAIR-400

The DATAIR-400 Handheld ARINC 429 Data Monitor is an easy to use diagnostic tool. It connects to an ARINC 429 data bus for instantaneous display of  the active Labels on the bus - without any preset conditions.  The ARINC 429 data word associated with a displayed Label can be viewed by simply positioning the cursor over the desired displayed Label and pressing the SELECT button. The display will then show, the ARINC 429 word in binary or engineering unit format, the rate of occurrence on the bus in milliseconds, the SSM value and the Parity bit. In addition to this, the monitor will automatically adapt to and display the bus bit rate. Further filtering on the selected Label can be obtained by selection of the SDI field.

  
  RECEIVER:

Very simple to use intelligent ARINC 429 Real
      Time Data Monitor.
Automatic Bus search with automatic bus speed
      selection.
User definable Engineering Units Display.
Opto-coupled isolated inputs.
RS232 port for Download of Word definitions.
  OTHER:

Three button 4 line by 16-character LCD user
      interface.
 Portable battery operation giving 8 hour operation
      (receive).
 Nickel painted EMC/RFI shielded enclosure.
 Full EMC Compliance to European (CE) directive.
 Weight: 750g (with batteries fitted)
 External supply: 3 to 7.5 volts DC @ 270mA
      (at 3V)
 External DC Connector: 3.5mm Jack.  
     NOTE: The Tip of the Plug is +6V.
 ARINC 429 Connector: D9 filtered Plug
 Environmental: 0 to 50 șC (operating)
Protective rubber cover option available
 		 

For comprehensive information on this instrument, click on the link below to download the user manual.

An Engineering Units Label Definition PC Software package is also supplied to define how ARINC 429 data can be displayed for the selected labels. The definitions are down-loaded to the DATAIR-400 via an RS232 link and are held in non-volatile memory. The package supports Signed binary, Unsigned binary, 2's Compliment, BCD and Discrete data formats.

The DATAIR-400 is a Handheld unit comprising of a 4 line by 16 character LCD, three button Menu User Interface, a microprocessor controlled ARINC-429 decoder and an integral battery compartment (takes 4x MN1500 (AA) cells).

A protective rubber cover option can be ordered separately. For more information, click here.

Click here to Download DATAIR-400 User Manual in Word format (Zipped 309kB).
[PASSWORD PROTECTED - To request password click here.]
 

Click here to view DATAIR-400 brochure (215kB).

Click here to view a DATAIR-400 Demo (5MB).
[PASSWORD PROTECTED - To request password click here.]

All units are designed to meet the European and US EMC regulations.

back to top

[Home] [Products] [About Us] [Support] [What's New] [Contact Us]

©YED Limited

Last Updated: 13 February, 2010 01:21 PM