Avionics Databus Solutions YED - an Avionics Databus Solutions Company

Multi-Label Transmitter
Handheld ARINC429 Tx/Rx

Part Number: YED/DATAIR-400/TRm


The DATAIR-400/TRm Handheld ARINC 429 Data Monitor is an easy to use diagnostic tool. It connects to an ARINC 429 data bus for instantaneous display of  the active Labels on the bus - without any preset conditions. The ARINC 429 data word associated with a displayed Label can be viewed by simply positioning the cursor over the desired displayed Label and pressing the SELECT button. The display will then show the ARINC 429 word in binary or engineering unit format, the rate of occurrence on the bus in milliseconds, the SSM value and the Parity bit. The monitor will automatically adapt to and display the bus bit rate. Further filtering on the selected Label can be obtained by selection of the SDI field. In addition to having the same receiver features as the DATAIR-400, the DATAIR-400/TR allows the user to generate  up to 16 ARINC 429 Labels to simulate a specific test.

The transmitter (new part number DATAIR-400/TRm) allows the user to set up a maximum of 16 ARINC 429 labels for transmission and to modify the transmitted data field for each Label (bits 9..32) in real time. The data field on the first Label can be edited to ramp up and then down by one LSB increment at a time. Labels to be transmitted are selected in Octal. The frequency and interval of the transmitted word can also be set. Single shot mode is also available. Edited binary data is displayable as a hexadecimal value in real time for those users who require this format.

 
 
RECEIVER:


Very simple to use intelligent ARINC 429 Real Time
      Data Monitor.
Automatic Bus search with automatic bus speed
      selection.
User definable Engineering Units Display.
Opto-coupled isolated inputs.
RS232 port for Download of Word definitions.
USB download version coming soon.

  TRANSMITTER(/TR):

16 Label Binary Word Transmitter.
Label selection, 000 thru 377.
Variable repeat rate selection.
12.5/100 kHz frequency selection.
Display of transmitted data in binary and
      hexadecimal.
Single Shot mode.
Real time update of transmitted data.
Automatic parity generation.
Unsigned sawtooth ramp function transmission in
      binary (ie. LSB increment).
Single shot of the Dynamic Ramp Label only.
Transmitter can be left active whilst using the
      receive/monitor functions.
With appropriately wired external D9 connector it is
      possible to perform a Loop-back test of Tx to Rx and
      display results.
Transmitter setups are held in non-volatile RAM.

 
  OTHER:

Three button 4 line by 16-character LCD user
      interface.
Portable battery operation giving 8 hour operation
      (receive).
Nickel painted EMC/RFI shielded enclosure.
Full EMC Compliance to European (CE) directive.
Weight: 750g (with batteries fitted)
External supply: 3 to 7.5 volts DC @ 270mA (at 3V)
External DC Connector: 3.5mm Jack.  
     NOTE: The Tip of the Plug is +6V.

ARINC 429 Connector: D9 filtered Plug
Environmental: 0 to 50 șC (operating)
Protective rubber cover option available
 

For comprehensive information on this instrument, click on the link below to download the user manual.

An Engineering Units Label Definition PC Software package is also supplied to define how ARINC 429 data can be displayed for the selected labels. The definitions are down-loaded to the DATAIR-400/TR via an RS232 link and are held in non-volatile memory. The package supports Signed binary, Unsigned binary, 2's Compliment, BCD and Discrete data formats.

The DATAIR-400/TR is a Handheld unit comprising of a 4 line by 16 character LCD, three button Menu User Interface, a microprocessor controlled ARINC 429 decoder and an integral battery compartment (takes 4x MN1500 (AA) cells).

A protective rubber cover option can be ordered separately. For more information, click here.

Demonstration: If you would like a video demonstration of the DATAIR-400/TR and you have a Skype account (see www.skype.com) then we would be pleased to arrange a video demonstration for you. Please e-mail us at sales@yed.com

Click here to Download DATAIR-400/TR User Manual in PDF format (4.3MB)
[PASSWORD PROTECTED - To request password click here.]


Click here to view DATAIR-400/TR brochure (186kB). Please note this brochure only details a Single Label Transmitter version of this instrument. All DATAIR-400/TR units supplied from today will have the 16-Label Transmit capability.

Click here to view a short video demo of how the sawtooth Ramp function is setup on the DATAIR-400/TRm (8.9MB).
[PASSWORD PROTECTED - To request password click here.]

Click here to view a short video demo of how the sawtooth Ramp function is setup in Single Shot mode on the DATAIR-400/TRm (2.9MB).
[PASSWORD PROTECTED - To request password click here.]

Click here to view a short video demo of how to edit the transmitted data in binary on the DATAIR-400/TRm (3.1MB).
[PASSWORD PROTECTED - To request password click here.]

All units are designed to meet the European and US EMC regulations.




back to top

[Home] [Products] [About Us] [Support] [What's New] [Contact Us]

YED is a trading name for YED Limited and YED Technologies Limited

©YED Limited

Last Updated: 05 September, 2010 04:11 PM