Avionics Databus Solutions YED - an Avionics Databus Solutions Company

What's New

ARINC429 Multi-Label Hand Held Transmitter

Part Number: YED/DATAIR-400/TRm

 

  
 

Enhanced DATAIR-400/TRm :

 Maximum of 16 ARINC 429 Labels can be transmitted at once.
Dynamic data ramping (as on current firmware) on the first transmitted Label.
Transmitter set-ups are held in non-volatile RAM preserving the set-ups during powering down of DATAIR-400/TRm.
Single Shot of set of Labels.
Single shot of the Dynamic Ramp Label only.
Transmitter can be left active whilst using the receive/monitor functions.
Loop-back test of TX to RX available with special connector and results can be displayed.
NOTE: Transmission only possible in binary and Hex.

The existing DATAIR-400/TR design has been enhanced to transmit up to 16 ARINC 429 labels. (previously only 1 label was transmitted). The DATAIR-400/TRm retains all the existing features of the receiver currently available in the DATAIR-400 model.

The transmitted data field for each Label (bits 9..32) can be modified in real time. The data field on the first Label can be edited to ramp up and then down by one LSB increment at a time. Labels to be transmitted are selected in Octal. The frequency and interval of the transmitted word can also be set. Single shot mode is also available. Edited binary data is displayable as a hexadecimal value in real time for those users who require this format.

For full product information, please visit the DATAIR-400/TRm product page.

Demonstration: If you would like a video demonstration of the DATAIR-400/TR and you have a Skype account (see www.skype.com) then we would be pleased to arrange a video demonstration for you. Please e-mail us at sales@yed.com

Click here to Download DATAIR-400/TR User Manual in PDF format (4.3MB)
[PASSWORD PROTECTED - To request password click here.]


Click here to view DATAIR-400/TR brochure (186kB). Please note this brochure only details a Single Label Transmitter version of this instrument. All DATAIR-400/TR units supplied from today will have the 16-Label Transmit capability.

Click here to view a short video demo of how the sawtooth Ramp function is setup on the DATAIR-400/TR (8.9MB).
[PASSWORD PROTECTED - To request password click here.]

Click here to view a short video demo of how the sawtooth Ramp function is setup in Single Shot mode on the DATAIR-400/TR (2.9MB).
[PASSWORD PROTECTED - To request password click here.]

Click here to view a short video demo of how to edit the transmitted data in binary on the DATAIR-400/TR (3.1MB).
[PASSWORD PROTECTED - To request password click here.]

All units are designed to meet the European and US EMC regulations.

back to top

[Home] [Products] [About Us] [Support] [What's New] [Contact Us]

YED is a trading name for YED Limited and YED Technologies Limited

İYED Limited

Last Updated: 05 September, 2010 04:11 PM