Support Warranty Policy Terms & Conditions
+44 (0)117 907 4761
Providing innovative and effective solutions for over 25 years
Features
In Detail
Specifications
Downloads

ARINC 429 to 0-10V DC

NEW - Updated!

 

This ARINC 429 to 0-10Vdc Output converter is also in use by many companies who have a requirement to extract a specific ARINC 429 parameter from a user selectable Label and translate it into a 0-10VDC output.

The Octal Label, the SDI, SSM are all selected via setting DIP switches on the PCB. The ARINC 429 to 0-10Vdc output converter adapts automatically to high or low speed (12.5/100kHz) ARINC 429 data and the inputs are opto-coupled for electrical isolation purposes. The ARINC 429 to 0-10Vdc Output converter is powered from an external 28 VDC (18-72V) nominal supply with an internal current and thermal (102 ºC) fuse. The power inputs are reverse polarity protected.

 

FPGA ONLY architechure - No microprocessor - RTCA DO-178B not required.

All units are designed to meet the European, US EMC regulations and RTCA DO-160G.

ARINC 429 to 0-10V DC Detail

Three LED indicators (optional) are provided and these indicate the following status:
 

  • LED indicating received data
  • LED indicating Low Speed data
  • LED indicating High Speed data


The ARINC 429 to 0-10Vdc Output converter uses a 12-Bit D/A resolution that takes its input from an ARINC 429 word - bits 29..18.

Different output voltage options and resolutions are available upon request. 

 

The connections for the YED/429/R1/DAT1 Adapter are via two D15 D-type connectors:

D15 Plug:

Signal Name
PIN #
 +28 Volts DC (18-72V)
1
 0 Volts (GND)
2
 ARINC 429 I/P +ve / RXA
3
 ARINC 429 I/P -ve /  RXB
4
 ARINC 429 Gnd / Screen (Shield)
5
 Label  : Analog +ve O/P
6
 Label  : Analog 0V O/P
7
 Reserved
8
 Reserved
9
 Reserved
10
 Reserved
11
 Reserved
12
 Reserved
13
 Reserved
14
 Reserved
15

Output has a 100nF capacitor across the Analog output.

 

FPGA ONLY architechure - No microprocessor - RTCA DO-178B not required.

All units are designed to meet the European, US EMC regulations and RTCA DO-160G.

ARINC 429 to 0-10V DC Specifications

  • ARINC 429 to DC output: 10VDC @ 25mA.
  • User selectable ARINC 429 Label using DIP switches.
  • User selectable SSM, SDI or Don't care.
  • Selection from up to 256 ARINC 429 Labels.
  • SPECIAL LABEL 164 Radar Altitude: 0 to 2500 feet with 0-10V DC output.
  • Automatic reception of Hi/Lo bit rate data.
  • Status indicator LED's on PCB.
  • 12-bit D/A resolution.
  • 15-72VDC power operation (28V @ 35mA).
  • Reverse power polarity protected.
  • Enclosure dimensions: 28.0 x 68.0 x 136.0 mm
  • Opto-coupled Rx inputs.
  • Current & thermal fuses (1Amp/102Deg.C).
  • Customised Aluminium blue anodies enclosre with Alochrom 1200 plated surfaces.
  • Superior EMC performance.
  • Weight: 300g.

 

FPGA ONLY architechure - No microprocessor - RTCA DO-178B not required.

All units are designed to meet the European, US EMC regulations and RTCA DO-160G.

ARINC 429 to 0-10V DC Downloads

   
download Click here to download the User Manual in PDF format (1258kB)

[PASSWORD PROTECTED - To request password click here.]
 
   
   
 
   



 

A429 R1 DAT1 10V WBGs